Frequency Response Analyzer FRA51615

---

	Impedance Measurement Adapter PA-001-0368 *1
	The PA-001-0368 terminal adapter is designed to measure the frequency response of impedance for electronic components. The test fixture comes with built-in shunt resistors for current detection (1 Ω, 10 Ω, 100 Ω) To protect the BNC connector of the instrument, use of the "PA-001-3058 High withstand voltage BNC extension cable set" for connection is recommended.

---

	Loop Gain Measurement Adapter PA-001-0369 *1
	The PA-001-0369 terminal adapter is designed to measure the loop gain of a negative feedback circuit in operation. (The clip cable is replaceable to PC-007-1922.) To protect the BNC connector of the instrument, use of the "PA-001-3058 High withstand voltage BNC extension cable set" for connection is recommended.

---

	High Power Measurement Adapter PA-001-1840 / PA-001-1841 *2
	The PA-001-1840/PA-001-1841 adapter is designed to combine with a bipolar amplifier to measure impedance at the actual operating voltage. • Built-in shunt resistor:   1 Ω (PA-001-1840) or 100 Ω (PA-001-1841) • Max. input voltage: 250 Vrms • Max. input current: 1 Arms (1 Ω), 0.1 Arms (100 Ω)

---

	Test Fixture Adapter PA-001-1838 / PA-001-1839 *1
	The test fixutre adapter PA-001-1838/PA-001-1839 enables impedance measurement in components of widely varying shapes. Adapter that can be connected to test fixtures for LCR meters and Impedance Analyzers. • Can be connected to test fixtures for LCR meters • Built-in shunt resistor:  1 Ω (PA-001-1838) or 100 Ω (PA-001-1839) * Seven types of test fixtures/leads provided for LCR meters.

---

	Shunt Resistor PA-001-0370 *2
	The shunt resistor PA-001-0370 is incorporated with a 1ω 4-terminal resistor, which is designed to detect a current (1 Arms maximum) flowing through a DUT. It is applicable to all FRA models.

---

	Signal Injector Probe 5055
	The signal injector probe 5055 is desgined as an auxilary unit to measure the loop response under servo systems or in closed loops. (Frequency range: DC to 100 kHz)

---

Optional accessories

Product name Type High withstand voltage clip set (3 per set) PA-001-3746 High withstand voltage alligator clip cable set (small) (3 per set) PA-001-0420 High withstand voltage alligator clip cable set (large) (3 per set) PA-001-0421 Alligator clip cable set (3 per set) PA-001-0422 *1 High withstand voltage BNC extension cable set (15 cm, 3 cables) PA-001-3058 High withstand voltage extension BNC cable (1 m) PC-007-0364 High withstand voltage BNC set (20 cm, 2 cables, for maintenance) PA-001-3059 High withstand voltage BNC adapter (T-branch, for maintenance) PC-001-4503 High withstand voltage BNC cable (for maintenance) PC-002-3347 Impedance measurement adapter kelvin clip (for maintenance) PC-007-1490 Loop gain measurement adapter clip cable (for maintenance) PC-007-1922 Rack mount kit (EIA) PA-001-3036 Rack mount kit (JIS) PA-001-0337

---

	*1	Safe operation of the instrument requires that the potential difference from the grounding potential is restricted to 42 Vpk or less.
	*2	No MEASUREMENT CATEGORY, Circuits not intended to be directly connected to the mains.