Frequency Response Analyzer FRA51602

---

	Loop Gain Measurement Adapter PA-001-0369 *1
	The PA-001-0369 terminal adapter is designed to measure the loop gain of a negative feedback circuit in operation. (The clip cable is replaceable to PC-007-1922.) To protect the BNC connector of the instrument, use of the "PA-001-3058 High withstand voltage BNC extension cable set" for connection is recommended.

---

	Shunt Resistor PA-001-0370 *2
	The shunt resistor PA-001-0370 is incorporated with a 1ω 4-terminal resistor, which is designed to detect a current (1 Arms maximum) flowing through a DUT. It is applicable to all FRA models.

---

	Signal Injector Probe 5055
	The signal injector probe 5055 is desgined as an auxilary unit to measure the loop response under servo systems or in closed loops. (Frequency range: DC to 100 kHz)

---

Optional accessories

Product name Type High withstand voltage clip set (3 per set) PA-001-3746 High withstand voltage alligator clip cable set (small) (3 per set) PA-001-0420 High withstand voltage alligator clip cable set (large) (3 per set) PA-001-0421 Alligator clip cable set (3 per set) PA-001-0422 *1 High withstand voltage BNC extension cable set (15 cm, 3 cables) PA-001-3058 High withstand voltage extension BNC cable (1 m) PC-007-0364 High withstand voltage BNC set (20 cm, 2 cables, for maintenance) PA-001-3059 High withstand voltage BNC adapter (T-branch, for maintenance) PC-001-4503 High withstand voltage BNC cable (for maintenance) PC-002-3347 Loop gain measurement adapter clip cable (for maintenance) PC-007-1922 Rack mount kit (EIA) PA-001-3036 Rack mount kit (JIS) PA-001-0337

---

	*1	Safe operation of the instrument requires that the potential difference from the grounding potential is restricted to 42 Vpk or less.
	*2	No MEASUREMENT CATEGORY, Circuits not intended to be directly connected to the mains.